16
15-TEMPERATURE SELECTION
PUFFER TEMPERATURE ADJUSTMENT SCREEN - NTC2 ACTIVE-INSTALLATION SET 5-6 CONFIGURATION
(SEE SYSTEM CONFIGURATION IN THE USER MENU)
With the
key, access the puffer temperature adjustment.
The PUFFER screen with probe appears when the INSTALLATION SET 6
CONFIGURATION is active.
At the bottom of the screen the temperature SET appears, at the top the
withdrawal HIGH probe temperature (NTC2) and if you decide to also enable
NTC3 (READ-ONLY) the T.MED (average temperature or mid puffer) indication
appears to include the stratification rating (NTC3 = T.MED).
On the other hand, if you select INSTALLATION SET 5 PUFFER CONFIGURATION
with thermostat, only ON/OFF will appear at the bottom.
ON appears in red. OFF appears in grey.
If NTC 2 is set in T.EXT you can nevertheless set NTC 3 in T.MED to activate
the reading of the puffer’s average temperature (without the possibility of
adjustment), to include the stratification rating.
•
The
keys allow you to edit the temperature. By pressing the
keys, all of the words at the centre of the display disappear, leaving only the current
setting visible.
•
The first press only enters the edit mode and shows the screen
illustrated above; pressing the
keys again will change the value.
Confirmation is automatic after a few seconds of inactivity.
Summary of Contents for SUITE-CLUB-MUSA Hydromatic 18 M2
Page 67: ......
