44
22-USER MENU
MAX POWER
Function to set the maximum power in case of a heat request by a probe/thermostat:
•
to change the values
• Available values -1-2-3-4-5 (DEFAULT 5)
•
to confirm and go back to the previous page (+beep)
•
to exit without confirming (+beep)
WINTER/SUMMER
•
to change the values
• Available values - WINTER / SUMMER
•
to confirm and go back to the previous page (+beep)
•
to exit without confirming (+beep)
INSTALLATION SET
These screens are used to set the systems according to the defaults required by the specification. With the choice of the system, the
inputs/outputs, Start&Stop etc….are activated/deactivated respectively
The information on the screens refers to the settings that will be implemented by activating the configuration.
In some configurations, it is possible to activate/deactivate the inputs and outputs individually as seen in the menus above, but any of
these changes will NOT appear on these screens because they represent the default settings of configuration 1/2/3/4/5/6
When you access the INSTALLATION SET MENU, you access the active screen (upon first installation it will be the default one).
• In the BOX on the left-hand side of the active configuration number - The system type will be represented with an image at the
top (radiator - radiator/DHW - radiator/storage tank etc...)
• In the centre, all of the settings that will be applied
• At the bottom, the selection confirmation key.
Controls:
to change the values
Available values 1 – 2 – 3 – 4 – 5 – 6
Default INSTALLATION SET 1 with HYDRO DATABASE or INSTALLATION SET 2 with HYDRO DHW DATABASE
to confirm and go back to the previous page (+beep)
to exit without confirming (+beep)
Summary of Contents for SUITE-CLUB-MUSA Hydromatic 18 M2
Page 67: ......
