MCZ KAIKA, Use And Maintenance Manual

Page: 21 / 57

PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL
page
21
Installation and assembly Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.3.
CLADDING ASSEMBLY
3.3.1.
KAIKA STOVE
Position the steel top “ A ” and secure it using the four screws supplied
“ D ” and “ E ” (two on the right and two on the left) from bottom
upwards.
Remove the back profile “
C ” already secured to the stove with three
screws “ F ”, “ G ” and “ H ”.
Take side “ B ” and insert it, corresponding to the holes, into plugs “ M ”
and “ N ” prearranged on the front part of the stove.
Secure side “ B ” using the uppers screws “ L ”.
At this point remount profile “ C ” securing it with three screws “ F ”, “ G ”
and “ H ” to the structure and to side “ B ” in steel.
A
B
C
D
E
F
G
L
H
Figure 4 – Assembling the sides Kaika stove