PELLET STOVES
Chapter 3
INSTALLATION AND USE MANUAL
page
17
Installation and assembly
Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.1.3.
Technical characteristics
Technical characteristics
Kaika – Face
Overall thermal power Max.
6,0 kw / 5160 kcal/h
Overall thermal power Min.
2.4 kw / 1720 kcal/h
Yield at maximum
92,8 %
Yield at minimum
94,0 %
Temperature of exhaust smoke at maximum
160°C
Temperature of exhaust smoke at minimum
100°C
Dust
14 mg/Nm3 (13% O2)
7 mg/MJ
CO at 13%O
²
at minimum and maximum
0.059 — 0.013%
CO
2
at minimum and maximum
4.1% – 8.0%
Mass of smoke at minimum and maximum
4 – 6 g/sec
Suggested draught at max power
0.10 mbar – 10 Pa
Suggested draught at min power
0.05 mbar – 5 Pa
Hopper capacity
20 litres
Fuel pellet type
Pellet diameter 6-8 mm. Length range 5-30 mm
Pellet consumption per hour
Min ~ 0.5 kg/h * Max. ~ 1.45 kg/h *
Operating time between re-fuelling
At min~ 20 h * At max. ~ 7 h *
Heatable volume m
3
129/40 – 147/35 – 172/30 **
Combustion air inlet
External diameter 50 mm.
Smoke outlet
External diameter 80 mm.
Maximum absorbed electrical power
Max.
3
20 W
–
Med. 80 W
Power supply frequency and voltage
230 Volts / 50 Hz
Net weight
120 kg
Weight with packaging
130 Kg
* Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/m
3
40-35-30 (respectively 40-35-30 Kcal/h for m
3
)
Appliance suitable for installation in a shared flue.
Summary of Contents for KAIKA
Page 1: ...USE AND MAINTENANCE MANUAL...
