McNeilus Zero Radius ZR 12 ft. Extended Reach, Operator'S Manual

Page: 55 / 118

43
© 2010 McNeilus Truck and Manufacturing, Inc.
Zero Radius Side Loader
Operation
2.2 Packing Functions
The packing functions are controlled by buttons located on
the cab control box. Automatic cycling of the packing panel
functions is controlled by the Auto Packing button. The Auto
Packing function will begin to operate after dumping refuse
in the hopper, depending on what the pack count is set to.
Manual cycling of the packing functions is controlled by the
EXTEND and RETRACT buttons. Pressing the EXTEND or
RETRACT buttons during an automatic packing cycle will stop
the Auto Packing function.
Be sure all non-operator personnel are at
least 20 feet (6 meters) away from all areas
of the Packer.
Serious personal injury or death may occur.
WARNING
2.2.1 Automatic Cycling of Packing Panel
Conditions
• Tailgate closed LED light must be green
• Side door LED lights must be off
•
Engine speed must be below 1700 rpm
• Top door must be up (open)
• Grabber must not be in the STOWED position
NOTE
If the packing panel is not in the HOME
position, press the RETRACT button to retract
it to the HOME position to start the cycle.
NOTE
The automatic packing cycle can be
interrupted by pressing any of the E-STOP
buttons.
Press and hold AUTO PACKING button (for 1 second) to
activate automatic cycling of the packing panel functions.
When activated, the packing panel extends from the HOME
position ( Figure 19 , Item 1) into the hopper until it reaches the
EXTEND position ( Figure 19 , Item 2). The packing panel then
reverses direction and retracts until it returns to the HOME
position.