17
© 2010 McNeilus Truck and Manufacturing, Inc.
Zero Radius Side Loader
Safety
WARNING
Any hydraulic tubing that is replaced must
conform to SAE J1065 specifications. If
incorrect hydraulic tubing is installed, the
hydraulic system may fail, serious injury or
death can result. Damage or leaking tubing
must be replaced before the Packer is
returned to service.
WARNING
Do not heat hydraulic tubing. The carbon
content of this steel tube is such that if
heated for bending, and either water or
air is quenched, the tubing may lose its
ductility and thereby be subject to failure
under high pressure or hydraulic shock
conditions. Serious injury can result.
Damaged or leaking tubing must be
replaced before the Packer is returned to
service. Please contact McNeilus Truck
and Manufacturing, Inc. at 888-686-7278
if you require assistance or have
questions.
WARNING
All hydraulic pressures must be relieved
from the hydraulic system prior to removing
any components from the system to
prevent oil from spraying or functions or
systems from falling. Failure to follow this
procedure can result in serious personal
injury or death.
WARNING
All hydraulic pressure must be relieved from
the hydraulic system prior to removing any
components from the system. To relieve the
hydraulic pressure from the hydraulic
system, turn the chassis engine OFF and
operate the Packer controls with the key in
the ON position. This will allow the spools
to shift and relieve the hydraulic pressure.
Failure to comply can result in serious injury
or death.