32
Trim Functions
The MX160 TRIM SELECT Control together with
the Front Panel Push-buttons or the
Remote Control Push-buttons pro-
vide the means to select and adjust
any one of the ten different Trim
Functions. Refer to figures 58A and
58B (Front Panel Control and Push-
buttons).
Figure 59 illustrates the Remote Control Trim Set-
tings Push-buttons. The Charts to the right provide
information about Trim Functions, Trim Function
Adjustments and the Front Panel Information Display
indicating the Trim Functions and Adjustments.
Note: Changes made to “RoomPerfect” and “Voicing”
Trim Settings are retained in memory, all other
Trim Adjustments return to default setting when
changing Inputs and switching the MX160 On/Off.
Press to step
thru the Trim
Modes
Press to exit
the Trim Modes
Press to change the Primary Trim
Setting (increase in level, another
choice, ON, etc.)
Press to change the Primary Trim
Setting (decrease in level, another
choice, OFF, etc.)
Press to change the Secondary
Trim Setting (increase in frequency,
increase in increment change, etc.)
Press to change the Secondary Trim
Setting (decrease in frequency,
decrease in increment change, etc.)
Figure 59
TRIM FUNCTIONS
TRIM NAME
TRIM DESCRIPTION
Voicing
There are seven built in different equalization variations to select from to restore musical balance:
Neutral - Flat frequency response
Music - Slight reduction in midrange frequencies
Music II - Slight reduction in midrange frequencies and slight high frequencies reduction
Relaxed - Slight increase in midbass frequencies and light reduction in midrange frequencies
Tilt - Increase of low frequencies and a reduction in high frequencies
Action - A slight boost in low frequencies
Movie - A slight boost in low frequencies and a gentle roll off in high frequencies
Bass
Allows for adjustment of the low frequencies; ±12dB in volume level, from 20Hz to 800Hz in fre-
quency
Treble
Allows for adjustment of the high frequencies; ±12dB in volume level, from 1,500Hz to 16,000Hz
in frequency
VFD Level
The Front Panel Information Display Brightness Level; has four choices 25, 50, 75 or 100 (default
setting)
Multi-View
Ok to activate
Lip Sync
Allows correction when the Video and Audio are out of synchronization; time delay is adjustable
from 0ms to 500ms in either 5ms or 25ms increments
Amp Light
Allows for switching Off the Meter Illumination of a connected compatible McIntosh Power Ampli-
fiers (via the Power Control Cable Connection)
Trim Center
Allows for adjustment of the Center Channel Volume Level relative to the Front Channels and Sur-
round Channels; ±10dB in volume level, adjustable in 1dB increments
Trim LFE
Allows for adjustment of the LFE (Low Frequency Effects) Channel Volume Level relative to the
Front, Center and Surround Channels; ±10dB in volume level, adjustable in 1dB increments
Trim
Surrounds
Allows for adjustment of the Surround Channels Volume Level relative to the Front Channels, Cen-
ter Channel and LFE Channel; ±10dB in volume level, adjustable in 1dB increments
Room Perfect
RoomPerfect Correction Process generates two room corrections, one for the
“Focus 1”
listening
location and one for the
“Global”
large listening area. (refer to page 28)
HDMI 1
Neutral 12%
Figure 58A
HDMI 1
Neutral 12%
Figure 58B
Primary Trim Setting
Secondary Trim Setting
Summary of Contents for MX160
Page 13: ...13 ...
Page 29: ...29 e XX Notes ...
Page 37: ...37 How to Operate Zone B Figure 68 ...
Page 39: ...39 Advanced Operation and Setup Figure 72 Figure 73 Figure 74 ...
