McIntosh MX160, Owner'S Manual

Page: 31 / 44

31
H. The HD AUDIO Display will illuminate when
the audio input signal is Digital High Definition
such as Dolby True HD, Dolby Atmos, DTS
Master HD, DTS-X or Auro 3D.
I. The 3D Audio will illuminate when the audio
input signal is Digital High Definition such as
Dolby Atmos, DTS-X or Auro 3D.
J. The 4K Video Display will Illuminate when the
video input signal is Digital Ultra High Defini-
tion (UHD).
Output Format:
K. The OUTPUT FORMAT LEDs indicate the
SURROUND MODE selected and the active
audio channels. Refer to figure 57.
Note: The following example of the illuminated
LED is based upon a 7.1 channel system.
If your system is configured as something
other than 7.1 (e.g. no Center Loudspeaker
or a single Back Surround Loudspeaker)
then the number of LEDs illuminated will
be different.
L. NO PROCESS-
ING mode for
a two channel
(Stereo) Input will
cause the L, R
and SUB LEDs to
illuminate.
M. Dolby Upmixer
or DTS NEO: X
(MOVIE, CIN-
EMA, MUSIC or GAMES) mode will cause
the LF, C, RF, RS, RRS, LRS, LS and SUB to
illuminate.
How to Operate the MX160
During the time the volume level
is being changed, the On-Screen
Display will indicate the Volume
Level %. When the MUTE Push-
button is pressed, the Front Panel
Information Display will indicate
the word “Muted” in place of the
Volume % and the On-Screen Dis -
play will replace the word “Vol-
ume:__” with “Muted:__”. Pressing
the MUTE Push-button a second
time, the listening volume level will
be restored and the displays will
again indicate the Volume:__ %.
Front Panel Status
The three sets of front panel LEDs
indicate the status of Input Format,
Operating/Decoding Modes and the
Output Format.
Notes: 1. If a Digital Input is select-
ed and the Digital Source
Component is not produc-
ing an output signal, none
of the Front Panel Status
LEDs will illuminate.
2. The new Digital Sound
Formats, including Dolby
Atmos, DTS-X and Auro
3D, do not rely on discrete
fixed channel positions
but rather as audio sound
objects that can be cor-
rectly placed in your Home Theater Loud-
speaker Setup Environment. Thus, when these
sound formats are played back, the MX160
Front Panel Input Format and Output Format
LED Indicators are not illuminated.
Input Format
A. If the input signal source is Eight Channel,
the front panel
INPUT FORMAT
LEDs LF, C, RF,
LS, LFE, RS,
LRS, S and RRS
will illuminate.
Refer to figure 55.
B. If a Digital Input
Signal Source is 2
Channel Surround
Encoded, the front panel INPUT FORMAT
LEDs LF, RF and S will illuminate.
Note: The “S” indicator will only illuminate on
some surround encoded program material.
C. If the Analog Input Signal Source is Stereo,
the INPUT FORMAT LEDs LF and RF will
illuminate.
D. If an Analog Input Signal Source is Mono, both
channels will be receiving the mono signal and
the INPUT FORMAT LEDs LF and RF will
illuminate.
Operating Mode Displays
E. The ANALOG SIGNAL Display will illuminate
when the audio input signal is analog. Refer to
figure 56.
F. The DIGITAL SIGNAL Display will illuminate
when the audio
input signal is
Digital.
G. The ROOM-
PERFECT
Display will il-
luminate when
RoomPerfect Correction Circuitry is Active.
Figure 54
Figure 55
HDMI 1
Neutral 12%
Figure 56
HDMI 1
Neutral 12%
Figure 57
HDMI 1
Neutral 12%