35
Reset of Microprocessors
In the highly unlikely event the Controls and/or Push-
buttons on the MX160 become non-response, it may
become necessary to reset the microprocessors in the
MX160. Perform the following steps to take corrective
action:
1. Switch the Rear Panel Main Power Rocker Switch
to the OFF Position.
2. After having waited at least 20 seconds, switch
the Rear Panel Main Power Rocker Switch to the
ON Position
3. Press the STANDBY/ON Push-button.
How to Operate the MX160, con’t
Late Night
The LATE NIGHT Push-button turns a volume com-
pression circuit On and Off. This feature suppresses
loud sounds or music that might disturb neighbors or
others not in the immediate area of the Home Theater.
Soft levels are also raised slightly so they are still
listenable at reduced overall volume levels. This works
only on a Dolby Digital Sound Track with encoded
data that supports the compression function.
Setup
Pressing the SETUP Push-button activates the MX160
SETUP Mode for making changes to the System set-
tings.
Adjust
▼ ▲
The ADJUST ▼ (Down) and ▲ (Up) Push-buttons
allow for adjustment of a selected Trim Function and
are used when in the Setup Mode.
Back
When the MX160 is in Setup Mode it is used for re-
turning to a previous Menu Screen.
Select
When the MX160 is in the Setup Mode it is used to
select the highlighted option.
Navigate
t u
The NAVIGATE
t
(Left) and
u
(Right) Push-buttons
move Left or Right through Menu Options. Also used
to activate the Trim Mode selecting the various Trim
Functions.
Summary of Contents for MX160
Page 13: ...13 ...
Page 29: ...29 e XX Notes ...
Page 37: ...37 How to Operate Zone B Figure 68 ...
Page 39: ...39 Advanced Operation and Setup Figure 72 Figure 73 Figure 74 ...
