
McHale
991 High Speed
Round Bale Wrapper
69
Every day
1.
Grease bale lift arm hinges
2.*
Grease bale lift arm hydraulic cylinder ends
3.
Grease sub chassis pivots
4.
Grease table tip hydraulic cylinder ends
5.
Grease bale damper hinge pivots
6.
Grease bale damper hydraulic cylinder ends
7.
Grease side tip bale damper hinges (option)
8.
Check wheel nuts and tyre pressure
9.
Check all guards and safety devices
10.
Check for any oil leaks and damaged pipes
11.
Check road traffic equipment (lighting and transport lock bar)
WARNING: Pay particular attention to the outer ram pin on the bale
lift arm
The outer ram pin connecting the ram piston to the bale lift arm is under
extremely heavy load and must be greased daily! If the pin is becoming
difficult to grease or if there is any noticeable wear (max 2 mm play), then
the pin must be replaced immediately. When the pin is being replaced,
ensure that the transport lock is in the locked position on the bale lift arm.
The bale lift arm should be well supported with lifting gear or slings, to
prevent it from moving or falling.
2*
7
5
4
1
2*
3
6
8
11 2*