
McHale
991 High Speed
Round Bale Wrapper
47
With either remote type, pressing the “Table Forward Rotate” Button on the handpiece
during wrapping will switch On/Off a 12 volt output on one of the spare electrical
connectors on the wrapper wiring loom. This feature can be used to switch on an
external valve on a hydraulic power pack to select a lower oil flow setting (This is useful
when wrapping badly shaped bales).
If the battery is low on the radio remote and a button is pressed then a LOW REMOTE
BATT warning will be displayed and the control unit will switch to manual mode.
There is a spare connector on the wrapper wiring loom marked with the letter “E”.
(On machines up to serial no. 58297 the white/blue wire is +12 volts and the yellow/
green is ground).
(On machines from serial no. 58298 the brown wire is +12 volts and the yellow/green
is ground).
The maximum current available on this 12 volt output is 3 amps.
WARNING: Radio remotes have a very long range, do not
accidentally press any buttons when not near the machine
There is a very long range with radio remotes (approx. 200 metres in the
line of sight), so care must be taken not to accidentally press any buttons
even when not near the machine. The control box must be in AUTO
mode before any remote functions will work.
NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
Radio receiver
Radio remote
CONTA
OA3MRF24J40MA
S/N:
2.4
4GHzRADIORECEIVER
S/HU/313-15-002
P/N:
AUTO
START
STOP
2.4GHz
Table forward
rotate
Starts Auto cycle/
Starts Auto tip
Table down
Close cut &
hold
Open cut & hold
Table up
Emergency stop
Table reverse
rotate