McFarlane HDL-100-44 Series, Operator'S Manual And Set-Up Instructions, Page: 36 / 55

APPENDIX B 36
4 FH-820 #4 HARROW BAR (FH-900-8)
5 FH-803 #5 HARROW BAR (FH-500-8)
5 FH-807 #5 HARROW BAR (FH-600-8)
5 FH-811 #5 HARROW BAR (FH-700-8)
5 FH-815 #5 HARROW BAR (FH-800-8)
5 FH-819 #5 HARROW BAR (FH-900-8)
6 FH-803 #6 HARROW BAR (FH-500-8)
6 FH-807 #6 HARROW BAR (FH-600-8)
6 FH-811 #6 HARROW BAR (FH-700-8)
6 FH-815 #6 HARROW BAR (FH-800-8)
6 FH-819 #6 HARROW BAR (FH-900-8)
7 FH-801 #7 HARROW BAR (FH-500-8)
7 FH-805 #7 HARROW BAR (FH-600-8)
7 FH-809 #7 HARROW BAR (FH-700-8)
7 FH-813 #7 HARROW BAR (FH-800-8)
7 FH-817 #7 HARROW BAR (FH-900-8)
8 FH-804 #8 HARROW BAR (FH-500-8)
8 FH-808 #8 HARROW BAR (FH-600-8)
8 FH-812 #8 HARROW BAR (FH-700-8)
8 FH-816 #8 HARROW BAR (FH-800-8)
8 FH-820 #8 HARROW BAR (FH-900-8)
9 E-611 1/2” x 3” SHANK SPIKE TOOTH ONLY
10 FH-125 CONNECTOR LINK (REGULAR)
11 FH-127 NOTCHED LINK CAP
12 ** 1/2” LOCK NUT
13 FH-122 PULL FLAT
14 FH-019 CAP CLIP
15 ** 1/2” x 3” BOLT
16 ** 1/2” FLANGED LOCK NUT
17 E-630 SPIKE TOOTH WASHER
18 E-620 1/2” x 2 1/2” SHANK SPIKE TOOTH ONLY
** E-610 1/2” x 2 1/2” SHANK SPIKE TOOTH w/WASHER
19 HDL-5100 DUAL SECTION CONNECTOR FLAT (16 BAR ONLY)
20 BV-7611 7/16” V-BOLT (16 BAR ONLY)
21 ** 1/2” x 2” BOLT, LOCK WASHER AND NUT (16 BAR ONLY)
** HDL-5101 DUAL SECTION CONNECTOR ASSEMBLY (16 BAR ONLY)
The #1 bar is the bar with an equal amount of tube to the right and left of the pull flats. The #8 bar
is the bar that is staggered off to one side.
When pulling the harrow section from the #1 bar, the teeth will be in the least aggressive setting.
When pulling from the #8 bar the teeth will be in the most aggressive setting.
9/24/08