24
5.
Now that the lights have been mounted and the wires run, attach wire harnesses to the frame
and hydraulic hoses with zip ties. Be sure to leave slack at the hinge points to prevent the
wire harness from becoming entangled. Also, securely attach the wire harness to the lift arm
and next to the light assembly.
6.
Tighten the light assemblies to the lift arms.
7.
Check to make sure that all the plugs are properly and securely connected and the wire
harnesses will not become entangled during operation or when the unit is folded into transport
position.
8.
Attach the unit to a tractor and plug in the lights. Check to make sure that they are working
properly and that the wires do not pull or get caught when folding the unit into the transport
position. With the unit in transport position, the red and yellow lights should be visible from
the rear. The red light should be closest to the ground.
Figure 14
Summary of Contents for HDL-100-44 Series
