19
Figure 9
Connect 4+4 Sections
1.
Bolt the front pull chains to the front tabs on the front harrow sections. Use 1/2 x 1 1/2 bolts,
flat washers and lock nuts. The chains should be bolted to the bottom of the pull tabs.
2.
Bolt the lift chains to the bottom of the rear lift tabs of the front harrow sections. Use 1/2 x
1 1/2 bolts, flat washers and lock nuts.
3.
Bolt the rear pull chains to the front tabs on the rear harrow sections. Use 1/2 x 1 1/2 bolts,
flat washers and lock nuts. The chains should be bolted to the bottom of the pull tabs.
4.
Make sure that the harrow sections match each other, the angle of attack is correct, and the
chains are not twisted.
Summary of Contents for HDL-100-44 Series
