Maintenance
9 - 5
Facer Blades
Ensure the machine is off.
Facer blades are sharp and can cut. Never attempt
to remove shavings while the facer is running, or is in
the facing position between the jaws. Use care when
operating the facer, and when handling the unit.
Facer blades bolt directly to the blade holders and should be inspected
for damage and sharpness. Dull or chipped blades must be replaced.
NOTICE:
Never extend the facer blades beyond the inner or outer
circumference of the facer.
TX04939-04-18-16
¡ATENCIÓN!
CD017
95-0
8-17
-16
Clean Heater Surfaces
The heater is hot and will burn clothing and
skin. Keep the heater in its insulated heater
stand or frame when not in use, and use
care when heating the pipe.
The butt fusion heater plate faces must be kept clean
and free of any plastic build up or contamination. Plastic
build up is best removed when the heater surfaces are at
fusion temperature using a clean dry non-synthetic cloth.
Synthetic cloths may melt to the heater surfaces under fusion
temperature.
The surface of the butt fusion heater plates are coated with an
antistick coating.
Before each fusion joint the heater surfaces must be wiped
with a dry clean non-synthetic cloth.
NOTICE:
Do not use any abrasive materials to clean heater
surfaces. Use only a non-synthetic cloth that won’t damage
heater surfaces.
TX00440-04-18-16
¡CUIDADO!
ОСТОРОЖНО
ATTENTION
CD017
98-0
8-17
-16
Check/Add Antifreeze
Add antifreeze in a 50/50 mix with water as needed.
Replace antifreeze mixture once each year or as recommended in
engine manual.
TX05183-09-22-16
CD018
41-0
9-
21-16