Special Operations
7 - 3
4-Jaw Carriage Removal (continued)
The outrigger is an arm that is retractable and adds support to the
carriage assembly when opening the jaws and pivoting the facer
away from the carriage.
To extend or retract the outrigger, press the locking button near
the base of the outrigger and push or pull the arm until the button
snaps to the locked position.
NOTICE:
Never use the outrigger to lift or move the carriage.
Connect the extension cable to the control pendant and to the
existing cable on the pendant arm.
Convert Self Retracting Heater to Top Loading:
Allow the heater to cool if it is hot.
Place the heater into the storage position between the fixed jaws
of the carriage.
Remove the pin at the rear of the heater and place it in the hole at
the rear of the heater arm.
To free the heater cable from the cable clamp, insert a small flat
tip screwdriver in the larger slot on the clamp and pry away from
the cable while lifting up on the top half of the clamp.
Attach stripper bar kit A1242107 to the heater for top loading
use.
TX05285-04-16-18
CD018
23-0
9-15-16
CD018
24
-0
9-15-16
CD018
84
-11-
30
-16
CD0
2201-0
4-0
4-18
PH0
56
77
-0
4-0
418
