Operation - Semi-Auto Fusion
5 - 4
Raise Pipe
Raise the fused pipe above the lower jaws using the machine's
hydraulic pipe lifts.
NOTICE:
Ensure pipe is raised high enough to clear the bead prior
to pulling fused pipe through the jaws.
TX01681-04-18-16
Opening Jaws
After the fusion process is complete, Shift the carriage directional
control to the neutral position.
Loosen all clamp knobs, and move carriage to the right far
enough to open the jaw nearest the facer.
Self Retracting Heater:
Facer will be positioned between the
movable jaws.
Open the jaws.
TX05357-04-09-18
CD018
69-11-
29-16
CD018
65-12
-0
5-16
Position Pipe for Next Joint
Position pipe with enough material protruding past the
inner fixed jaw face to allow for complete facing of the
pipe end.
If you choose to drive to the pipe, ensure the area around the
vehicle is clear of personnel and obstructions.
Ensure there are no personnel near the vehicle
when driving. Failure to do so could result in
serious injury or death to personnel.
TX04917-04-18-16
¡ATENCIÓN!
Install Next Piece of Pipe
Install a new piece of pipe in movable jaws, and position pipe
with enough material protruding past the inner movable jaw face
to allow for complete facing of the pipe end.
Repeat all previous steps after "Loading Pipe into Machine"
section.
TX00384-04-18-16
CD018
70
-11-
29-16
CD018
64
-11-17
-16
