Prepare Heater
Heater is not explosion proof. Operation of
heater in an explosive atmosphere without
necessary safety precautions will result in serious
injury or death.
Install butt fusion heater plates while heater is cool.
NOTICE:
The heater should never be used without butt fusion
heater plates installed. Refer to the "Maintenance" section of this
manual for installation procedure.
Place heater in insulated heater stand or shroud.
Plug heater into the appropriate outlet on machine.
IMPORTANT:
Engine must be in high speed to provide electric
power to the heater.
Allow heater to warm-up to operating temperature.
TX05279-04-06-17
Operation - General
3 - 2
¡PELIGRO!
Moving Machine Into Position
Make sure all personnel are safely clear of the machine before
moving.
Stand behind the machine console.
Move both track control levers forward to go in a straight line.
Release the levers to stop. Moving just the right track forward turns
the machine to the left. Moving just the left track forward turns the
machine to the right. Pull levers back to back up.
TX01491-3-2-98
Set up Pipe Supports
Set up pipe stands or pipe rollers and adjust height so the pipe is
in line with the jaws.
TX02955-4-15-09
PH0
38
79-
4-15-0
9
CD017
88-0
8-17
-16
CD0
20
25-0
3-06
-17
CD0
20
25-0
3-06
-17
CD018
63-11-17
-16
