
Operation - General
3 - 1
Read Before Operating
Before operating this machine, please read this manual thoroughly
and keep a copy available for future reference.
Return manual to the protective storage box when not in use. This
manual is to be considered part of your machine.
TX00401-9-15-94
ST
OP
-12
-2
8-9
5
Check Hydraulic Fluid Level
Check fluid level in the reservoir and verify that fluid is visible in
the strainer.
Refer to the “Hydraulic Fluids” section of this manual for hydraulic
oil recommendations.
If fluid is not visible in the reservoir strainer, fill reservoir until fluid
is visible in the strainer.
Do not overfill reservoir. The fluid will expand as it heats up.
Never allow dirt, water, or other foreign matter to enter the tank.
Use only clean oil from an unopened container.
TX02323-02-27-14
Diesel Engine
Read the operating and maintenance instructions for the engine
before operating.
Combustion engines can cause explosions when
operated in an explosive atmosphere. Do not
operate gas or diesel powered machines in an
explosive atmosphere.
Help prevent fires by keeping machine clean of accumulated trash,
debris and facer shavings.
The key ignition has four positions. Preheat, off, run and start.
NOTICE:
Set the engine to slow speed before starting. Never use
starting fluid.
Open facer valve. Turn switch to the left to preheat, until the
red glow plug lamp goes out. Turn the key to the right to start
the engine. Close the facer valve to allow the machine to build
pressure.
Turn the key to OFF to stop the engine.
TX05278-04-06-17
CD017
92
-0
8-17
-16
¡PELIGRO!
CD018
58-11-16
-16
CD018
49-0
9-
21-16