4
5.3.
Using a T-25 Torx wrench, remove the screw
securing the cover to the unit. See Figure 8.
5.4.
Remove the cover.
6.
REMOVING THE CHAIN AND BAR
6.1.
Remove the brake assembly cover. See
REMOVAL OF BRAKE ASSEMBLY Section.
6.2.
Remove the chain from the bar. See Figure 9.
6.3.
Lift the bar from the mounting stud and guide.
6.4.
During assembly make certain that the tab from
the tensioning screw fits into the hole in the
chain bar. See Figure 10. See Figure 11.
7.
REMOVAL OF CLUTCH AND DRUM ASSEM-
BLY
7.1.
Remove the spark plug from the unit.
7.2.
Remove the brake assembly kit cover.
7.3.
Remove the chain and bar.
7.4.
Place a piece of starter cord into the spark plug
opening. This will aid in removing of the nut
securing the clutch and drum assembly to the
crankshaft. See Figure 12.
Figure 9
Figure 10
Tensioning Screw Tab
Figure 11
Hole for Tab
Figure 12
Starter Cord