McConnel ROBOPOWER, Operator'S Manual

Page: 43 / 138

$87(&5(&(,9(581,7,'(17,),&$7,213/$7(
The following plates are on the receiver unit:
3ODWH 3RVLWLRQ ,QIRUPDWLRQFRQWDLQHG
5HPRWHFRQWUROXQLWLGHQWL¿FD
-
tion plate
This is found on the casing of
the receiver unit on the con-
nectors side: The serial number of the
remote control, a bar code and
the year of manufacturer.
Rating plate This is found on the left-hand
side of the casing. The MODEL, TYPE and main
technical data of the receiver,
the markings and any remote
control trademarks.
$87(&5(&(,9(581,7%$&./,76,*16
The remote control unit feature four LEDs:
•
RUN green
• ERR red
• POWER green
• ALARM red
581/('*5((1
The RUN LED indicates the status of the remote control's communication status with the CAN
network Master node.
581/('
6,*1$/ 0($1,1*
Off The remote control unit as a node in the CAN network is off.
Flashing The remote control unit is not sending commands to the CAN network.
Access The remote control unit as a node in the CAN network is working properly.
(55/('5('
The ERR LED indicates the status of the CAN communication.
(55/('
6,*1$/ 0($1,1*
Off The CAN communication is working properly.
Flashing The CAN communication is not working properly.
Access No CAN communication.
30