12
Location of Belt Tension Gauge
Hydraulic Installation
Install and connect hydraulic hoses ensuring the correct cutting direction is achieved.
The drain line hose
(max.1.5 bar)
must be connected directly back to the oil reservoir.
Run the machine to confirm that the blade rotation direction is correct.
Switch machine off and inspect the hoses and connections for signs of leaks.
Check belt tension before using the machine for work,
refer to belt tensioning section.
Belts Access
Access to the belts for checking and/or adjustment requires removal of the lower belt cover.
Tools required;
17mm spanner or socket, belt tension gauge or sonic meter.
Avoid contact with blade teeth when accessing belts and adjusters;
the edges of blades are dangerous even when stationary.
A belt tension gauge is supplied with the machine, this can be found beneath the belt cover
in the centre cavity adjacent to belt adjusters. Ensure the gauge is replaced securely in the
storage bracket when not in use.