1
GENERAL INFORMATION
Read this manual before fitting or operating the machine or accessory. Whenever any doubt
exists contact your local dealer or the McConnel Service Department for assistance.
Only use ‘Genuine McConnel Parts’ on McConnel machinery and equipment
.
DEFINITIONS
:
The following definitions apply throughout this manual;
DANGER:
Alerts to a hazardous situation which will result in death or serious injury if not
observed carefully.
WARNING:
Alerts to a hazardous situation which could result in death or serious injury if not
observed carefully.
CAUTION:
Alerts to a hazardous situation which could result in damage to the machine
and/or equipment if not observed carefully.
NOTICE:
Specific or general information considered important or useful to emphasise.
LEFT HAND (LH) & RIGHT HAND (RH):
These terms are applicable to the machine when
fitted to the tractor and viewed from the rear; these terms also apply to tractor references.
SERIAL PLATE
All machines are equipped with a serial number plate containing important information
relating to the machine including a unique serial number used for identification purposes.
Note: Images in this manual are provided for instruction and informational purposes only and may not
show components in their entirety. In certain instances images may appear different to the actual
machine; where this occurs the general procedure will be basically the same. E&OE.
MACHINE & DEALER INFORMATION
Record the serial number of your machine on this page and always quote it when ordering parts.
Whenever information concerning the machine is requested remember to also state the make and
model of tractor to which the machine is fitted.
Machine Serial Number:
Installation Date:
Machine Model Details:
Dealer Name & Branch:
Dealer Address:
Dealer Telephone No:
Dealer Email Address: