11
Attachment to Power Arm
Tools required;
24mm spanner, 24mm socket, torque wrench
The Multisaw attaches to the pivot flange of the Power Arm and is secured with four bolts
and locknuts; torque locknuts evenly to 203Nm
(150 ft.lb).
IMPORTANT:
Check Multisaw blades are correctly mounted; the blades MUST be mounted
in a downward cut rotation in relation to the tractors driving direction,
see illustration below.
Blade Cutting Direction
Blades must cut downwards on the leading edge in the direction of tractor travel
With the Multisaw located
on a firm level site, operate
the Power Arm to position
the pivot flange adjacent to
the mounting flange of the
Multisaw; adjust angle to
align the holes.
Fit the 4 bolts and locknuts.
Torque locknuts to 203Nm.