McAfee VIRUSSCAN 5.1 User Manual Download Page 92

Page: 92 / 315

Using the VShield Scanner

McAfee VirusScan

The next wizard panel sets options for the VShield Download Scan
module (

Figure 4-6

Figure 4-6. VShield Configuration Wizard - Download Scan panel

6. To have the Download Scan module look for viruses in each file that you

download from the Internet, select the

Yes, do scan my downloaded

files for viruses

checkbox, then click

Next>

to continue.

The module will look for viruses in those files most susceptible to
infection and will scan compressed files as you receive them.

Otherwise, select the

No, do not enable download scanning

checkbox,

then click

Next>

to continue.

The next wizard panel sets options for the VShield Internet Filter module
(

Figure 4-7

Figure 4-7. VShield configuration wizard - Internet Filter panel

Summary of Contents for VIRUSSCAN 5.1




























































































































































































































































































































Search results

Summary of Contents for VIRUSSCAN 5.1

Reviews:

Related manuals for VIRUSSCAN 5.1

Brands by name

Popular brands

McAfee VIRUSSCAN 5.1, User Manual

Search results

Summary of Contents for VIRUSSCAN 5.1

Reviews:

Related manuals for VIRUSSCAN 5.1

Brands by name

Popular brands