59
10. Commissioning
PITCH-BEND buttons
• Hold down the PITCH BEND +/- (22 or 23) buttons during playback to change the speed.
The PITCH BEND- button (22) reduces the speed.
The PITCH BEND+ button (23) increases the speed.
• The longer the PITCH BEND button is held down, to bigger the corresponding speed change.
• When the button is released, the music is played at original speed or at the speed specified by the PITCH
slide control (17).
p) Scratch Function CD/USB
• Push the button PITCH BEND / SEARCH / SCRATCH (11) until it flashes.
• If you touch the touch wheel (12) during playback now, playback will pause.
• Moving the touch wheel, you can scratch as on a record player. This means rhythmic moving back and forth of
a record on the turntable with the pick-up needle applied.
• Release the touch wheel (12) again to resume regular playback.
q) DSP Effects USB/SD
BRAKE effect
• Push the button DSP BRAKE (9) to activate this effect.
• The button DSP BRAKE (9) is lit when the effect is active.
• When playback is started or stopped, this will not be sudden but with a delay.
• This effect is similar to deceleration or slow start-up of a turntable in a record player.
REVERSE effect
• Push the button DSP REVERSE (10) to activate this effect.
• The button DSP REVERSE (10) is lit when the effect is active.
• Playback will be backwards if this effect is active.
