57
10. Commissioning
l) Cueing CD/USB
You can select the starting point for playback using the CUE-function. The starting point is set automatically (AUTO
CUE).
The advantage of this function is that e.g. mute time at the start of a track is not played back and that
there are therefore no breaks after starting the playback.
Auto CUE
• When starting playback, the device automatically sets the CUE mark at the place where the music starts.
Back CUE
• During playback, push the CUE button (13).
• The player returns to where playback was started and pauses.
Checking the CUE mark
• Press the CUE button (13).
• The device returns to the CUE mark and pauses.
• Hold down the CUE button (13).
• The music is played from the CUE mark as long as you hold down the CUE (13) button.
• When the button is released, the player returns to the CUE mark and pauses.
Deleting a CUE mark
• The CUE mark is deleted as soon as a new CUE mark is set.
m) LOOP Function CD/USB (Playback Loop)
You can define a play loop. The starting and end point of the loop are set during playback.
• At the desired starting point of the play loop, press the LOOP IN button (19).
• At the desired end point of the play loop, press the LOOP OUT button (20).
• The play loop is now played continuously until the LOOP OUT button (20) is pressed again.
• To start a saved play loop, press the RELOOP button (18).
The existing playback loop is deleted when a new playback loop is programmed.
