Operating Manual
Operating Manual Page 2-13
2.6.5 Handling of Electronic Components
CAUTION
Risk of damage to electronic components of the system
due to electrostatic discharge!
►
Wear a grounded wrist strap or work on a grounded static-
dissipating work surface. If this is not possible touch an
adjacent earth ground (i.e. central heaters or water pipes)
before handling electronic components or printed circuit
boards.
►
Leave electronic components and printed circuit boards in their
original packaging until final installation.
►
Handle electronic components by their body or case, avoid
touching of leads.
►
Keep electronic components and printed circuit boards away
from such static generating materials as vinyl, plastic bags, etc.
2.6.6 Solvents, Chemicals and Gases
Solvents, chemicals and gases used in the system are not supplied by
MBRAUN
. Any
substances handled within in the glovebox are provided and applied by the system user.
Note: The safe handling of flammable or explosive gases in an inert gas glove box requires
additional safety measures that are not included in the standard configuration of a
MBRAUN
glove
box system. Please contact the
MBRAUN
service department if you intend to handle these kind of
substances inside the glove box and need a safety upgrade for your system.
