MBO Delivery KAS 30ME, Translation Of The Original Operating Manual

Page: 73 / 93

Delivery KAS 30ME MC-Control 69
Adjustment and operation
Adjustment
7.3.10 Adjusting the pile stop
The pile stop (3) prevents the sheets set up from tipping over.
It is guided in the guide rail (2).
The resistance is set using the adjusting screw (4).
Procedure:
Position the guide rail (2) in the middle ot the set-up sheet.
Position the pile stop (3) under the stop (1).
Adjust the resistance with the adjusting screw (3).
Turn clockwise = resistance increases.
Turn counter-clockwise = resistance decreases.
1 Set-up stop
2 Guide rail
3 Pile stop
4 Adjusting screw
Figure 28: Adjusting the pile stop
3
1
4
2