MBO Delivery KAS 30ME, Translation Of The Original Operating Manual

Page: 71 / 93

Delivery KAS 30ME MC-Control 67
Adjustment and operation
Adjustment
7.3.8 Setting stop to sheet length
Set the stops (2) to the length of the sheet being fed in.
Basic setting Set the stops to the same height.
Procedure:
Loosen the screw (1).
Set the stops to the same height.
Tighten the screw (1) again.
Overall adjustment All stops can now be set collectively to the length of the sheet being fed in.
Procedure:
Loosen the clamping levers (3) on both sides.
Set the stop (2) to the length of the sheet being fed in.The sheet may
not be clamped.
Tighten the clamping levers (3) again on both sides.
1 Screw
2 Stop
3 Clamping lever
Figure 26: Setting stop
3
2
1