80
Delivery KAS 30ME MC-Control
Maintenance
Maintenance
8.4.2
Checking the drive belt
Removing the guard:
Procedure:
Remove the fastening screws.
Remove the guard.
Tensioning the drive
belt:
Procedure:
Loosen the screw (2) of the belt tensioner (1).
Tension the drive belt (3) with the belt tensioner (1).
Tighten the screw (2) again.
Replacing the
drive belt:
Procedure:
Loosen the screw (2) of the belt tensioner (1).
Remove the old drive belt (3).
Insert the new drive belt (3).
Tension the drive belt (3) with the belt tensioner (1).
Tighten the screw (2) again.
Attaching the guard:
Procedure:
Attach the guard again.
Insert the fastening screws and tighten them.
Check the drive belt monthly for its running properties, tension, condition,
and soiling.
If the required tension can no longer be adjusted or if the general state is
poor, it must be replaced.
1
Belt tensioner
2
Screw
3
Drive belt
Figure 32: Checking the drive belt
3
2
1
Summary of Contents for Delivery KAS 30ME
Page 1: ...Delivery Translation of the original operating manual Keep for future use KAS 30ME MC Control...
Page 9: ...Delivery KAS 30ME MC Control 5 List of contents 10 2 Disposal recycling 88...
Page 10: ...6 Delivery KAS 30ME MC Control List of contents...
Page 50: ...46 Delivery KAS 30ME MC Control Operating and display elements operating modes Operating modes...
