MBIT Technologies
*
www.mbit.com.au
6
2 INSTALLING
2.1 Assembling the Phone and Connecting to the Network
1) Plug one end of the coiled phone cord into the left side of the phone base.
2) Plug the other end of the handset cord into the jack at the bottom of the handset.
3) If you are using an external power source, push the power cord into the power supply, and plug the
power supply into the phone base unit. Note: Use only the power supply that came with the phone.
4) Plug the Ethernet cable into Internet port in the rear side of the base station. Plug the other end of the
Ethernet cable into your already prepared network connection.
2.2 Mounting the Phone to the Wall
1) Complete the assembly instructions.
2) Attach two appropriate screws to the wall. Leave 1/4 distance from the wall. This allows you to slide the
mounting brackets on to the screws. Push down slightly to lock the phone in place.
2.3 Turning on the Phone
This section assumes that the correct connections have been made.
1) Check whether the Internet port is well connected.
2) Plug the AC power adapter into the electrical outlet.
Note: Use only the adapter that came with the phone.
3) The LCD will firstly display “Welcome” and all of the lights on the phone will flash.
4) Next, the LCD display “Initialising Network”.
5) After the sequence, the phone will display date & time, lines status for the phone, and bb100 is started
normally.
Note: If the phone does not provide this screen, re-confirm installation and connections. If these
are incorrect, try unplugging the phone and plugging it back in again. If you still don’t see the
display, then contact your Phone Administrator or service provider.
2.4 Connect to the Internet
You can connect the bb100 to the Internet via wired and via wireless.
2.4.1 Via Wired
Step 1: Check bb100 have powered on correctly.
Step 2: Plug the Ethernet cable into Internet port in the rear side of the base station. Plug the other end of
the Ethernet cable into your already prepared network connection.
Step 3: After the sequence, the IP Address of Internet port will appear at the bottom of the LCD.
