MBIT TECHNOLOGIES bb100 User Manual Download Page 53

Page: 53 / 59

MBIT Technologies

www.mbit.com.au

bb100 support local and remote Syslog.

In local:

Step 1. Set syslog server null and choose one

kind of Log Level, like Picture 1.

Step 2. Press Saving Settings button to save and

press Reboot button to active changes.

Step 3. User can view syslog in Status/Syslog

webpage.

In remote:

Step 1. Fill in syslog server IP address or domain

name

Step 2. Choose one kind of Log Level, like Picture

Step 3. Press Saving Settings button to save and

press Reboot button to active changes.

Step 4. User can view syslog in syslog server, and

you can also view the syslog in Status/
Syslog webpage.

7.8.1.5 Factory Defaults

7.8.2 Firmware Upgrade

Description
Press Factory Default button to set bb100
default.

Description
Steps:

Step 1: Choose a upgrade file type from Upgrade

Software, Upgrade Ring Voice, Upgrade
Dial Plan and Upgrade Config File

Step 2: Press Browser to browser the upgrade

file.

Step 3: Press Update to start upgrading, LCD will

display the notice when upgrading.

Step 4: Login web and then check the firmware

whether well upgraded by viewing
the firmware version in Status/Basic
webpage.

Picture 2

Picture 3

Summary of Contents for bb100




























































Search results

Summary of Contents for bb100

Reviews:

Related manuals for bb100

Brands by name

Popular brands

MBIT TECHNOLOGIES bb100, User Manual

Search results

Summary of Contents for bb100

Reviews:

Related manuals for bb100

Brands by name

Popular brands