manualshive.com logo in svg

MBIT TECHNOLOGIES bb100, User Manual, Page: 54 / 59

Share
Download
MBIT TECHNOLOGIES bb100 User Manual Download Page 54

MBIT Technologies   

* 

 

www.mbit.com.au

54

7.8.3 Provision

1) Provisioning allow bb100 auto-upgrading or auto-configuring 

2) bb100 supports 3 ways to provision: TFTP, HTTP and HTTPS.

• Before testing or using TFTP, user should have tftp server and upgrading file and configuring file.
• Before testing or using HTTP, user should have http server and upgrading file and configuring file.
• Before testing or using HTTPS, user should have https server and upgrading file and configuring file 

and CA Certificate file(should same as https server’s) and Client Certificate file and Private key file

3) User can uploading CA Certificate file and Client Certificate file and Private Key file in Equipment 

Manage/Cert Manage page.

4) Details please refer to document Provision_User Manual_en_v1.1.doc

Field Name

Description

Provision Enable

If or not enable provision.

Resync on Reset

If or not enable resync after 
restart

Resync Random 
Delay(sec)

Set the maximum delay for 
request the synchronization 
file, default is 40.

Resync 
Periodic(sec)

If the last resync was failure, 
bb100 will retry resync after the 
“Resync Error Retry Delay ” time, 
default is 3600s.

Resync Error 
Retry Delay(rec)

Set the periodic time for resync, 
default is 3600s.

Forced Resync 
Delay(sec)

If it’s time to resync, but bb100 
is busy now, in this case, bb100 
will wait for a period time, 
the longest is “Forced Resync 
Delay”, default is 14400s, when 
the time over, bb100 will forced 
to resync.

Resync After 
Upgrade

If or not enable firmware 
upgrade after resync, by default 
it is enabled.

Resync From SIP

If or not enable resync from SIP. 

Option 66

It is used for In-house provision 
mode only. When use TFTP 
with option 66 to realize 
provisioning, user must 
input right configuration file 
name in IP542N’s webpage. 
When disable Option 66, this 
parameter has no effect.

Summary of Contents for bb100




























































Reviews:

No comments