MB 700 H Series, Operation Manual

Page: 65 / 68

65
ii) Connect the antenna securely and place
the antenna to get best signal strength.
iii) Verify that SIM is inserted properly.
iv) Verify correct selection of cellular
service provider.
v) Check that there is enough balance in
the SIM for data communication
Table-9.4: Soiling station Modem
10.5 Soiling Parameters
Sr. No. Problem Solutions
1
Panel temperature i) Check proper connection of the panel
temperature sensor.
2
Panel voltage and current i) Verify that panel has been connected
properly.
Table-9.5: Soiling parameters
10.6 File Transfer Operation
Sr. No. Problem Solutions
1
File transfer not OK. i) Check the media for file transfer
Modem of ETH.
ii) If modem is selected – check that no
problem exists
with modem .
iii) If ETH is selected – check problems
with
ETH network .
iv) Verify configuration of IP, username
and passwords for remote file servers.
v) Check file servers with ping
Table-9.6: File transfer Operation
10.7 Datalogging Operation
Sr. No. Problem Solutions
1
SD Card problem i) Check SD Card status on OLED or
webserver.
ii) Check that SD card is inserted
properly.
iii) Put Off the datalogger, remove the SD
card. Verify operation of SD card on
PC or laptop.
iv) If required format the SD card.
Remember to save the logger files prior
to formatting the SD card.
2
Parameter values are not
being logged i) Verify that datalogging operation is
enabled for the remote server .