17
soiling station IP address is known, use webserver in the soiling station to set the
required IP address.
Figure -3.4.4.2: Jumpers for setting default IP address in the soiling station.
1.
For normal operation jumper 6 and 4 shall be in open condition.
2.
For setting default IP address short jumper 6 and 4 for about two seconds.
3.
Remove the jumper between 6 and 4.
4.
Wait for about five seconds.
5.
Soiling station will restart with default IP address. Only default IP address and
Subnet shall be set to default values.
6.
Verify default IP address by using ping and / or logging in the soiling station
webserver.
3.4.5 SD Memory Card
Soiling station supports microSD memory card up-to 16GB.
Figure-3.4.5: Soiling station SD card slot.
MicroSD card is used for data logging.
Configuration of data logging operations can be done via webserver.
Summary of Contents for 700 H Series
Page 8: ...8 M Soiling station with modem H Soiling station with high wattage solar panel...
Page 19: ...19...
Page 37: ...37...
