MB 700 H Series, Operation Manual

Page: 62 / 68

62
3
Reference panel
cleaning time –
Minutes (0-59) 10652
16 bits Unsigned
Integer
Read / Write
4
Reference panel
number of cleaning
cycles (1-10)
10653
16 bits Unsigned
Integer
Read / Write
5
Reference panel clean
ON Time (sec) (5-99)
10654
16 bits Unsigned
Integer
Read / Write
6
Reference panel clean
OFF Time (sec) (5-99)
10655
16 bits Unsigned
Integer
Read / Write
7
Soiled panel number of
cleaning cycles (1-10)
10656
16 bits Unsigned
Integer
Read / Write
8
Soiled panel clean ON
Time (sec) (5-99)
10657
16 bits Unsigned
Integer
Read / Write
9
Soiled panel clean OFF
Time (sec) (5-99)
10658
16 bits Unsigned
Integer
Read / Write
Table-8.5: Cleaning system configuration parameters
8.6 Cleaning System Control Parameters
Cleaning system command registers.
Sr. No Parameter Register Address Type Read/ Write
1
Reference Panel
Cleaning control (i)
b0: Start
b1: Stop
10660
16 bits Unsigned
Integer
Write only
2
Soiled Panel Cleaning
control (ii)
b0: Start
b1: Stop
10661
16 bits Unsigned
Integer
Write only
3
Cleaning Hardware
b0: Pump On
b1: Valve Clean
b2: Valve Soiled
10662
16 bits Unsigned
Integer
Write only
Table-8.6: Cleaning system control parameters
Note:
i)
Reference panel cleaning control: ‘Start’ will start the cleaning operation of
reference panel. It will stop after completing the cleaning cycles as configured
via the webserver. ‘Stop’ will terminate cleaning operation of the reference
panel.
ii)
Soiled panel cleaning control: ‘Start’ will start the cleaning operation of the
soiled panel. It will stop after completing the cleaning cycles as configured via
the webserver. ‘Stop’ will terminate cleaning operation of the soiled panel.
iii) The pump and valves will be on for the time configured via the web server if
Power Supply is available and water level is above the low level.