20
9. Turn the grommet counterclockwise and remove it
in the direction of arrow (1) shown in the figure.
10. Disconnect the connector and remove the rear
combination light from the body.
11. Remove the grommet and from the body.
12. Remove the fasteners.
Screw installation note
1. Install the screws in the order of (1) and (2).
Grommet
Fastener
Rear combination light
Screw (1)
Screw (2)
Rear combination light short cord
Connector
Rear combination light
Grommet
(1)
When removing the rear combination light from
the body, the rear combination light may fall off
and be damaged. Remove the rear combination
light from the body while holding the rear
combination light on the lens side by hand.
CAUTION
