6
■
Securing harness
1. When the wiring harness is secured using a mount
base, passing a tie wrap through the mount base
and temporarily tightening the wiring harness as
shown in the figure will make the operation easier.
■
Securing grommet
1. When inserting the grommet, firmly press in the
entire circumference by hand.
Completely encapsulate with no eversion on
the grommet. Otherwise, water may penetrate
the cabin causing rust or a malfunction.
When securing the tie wrap, be careful not to
deform the grommet or separate it at the ends.
Grommet
Tie wrap
Tie wrap
CAUTION
Tie wrap
Mount base
Harness
Press in
Vehicle interior
Vehicle exterior
Installed condition
Vehicle interior
Vehicle exterior
