18
Rear combination light removal
1. Insert the remover tool into the service hole at the
position shown in the figure.
2. Move the remover tool in the direction of arrow (1)
shown in the figure and pull out the service hole
cover tab from the rear combination light.
3. Remove the service hole cover.
4. Remove the screws.
Rear combination light
Vehicle front
Vehicle front
Rear combination light
Tab
Service hole cover
Remover tool
(1)
Rear combination light
Screw
Service hole cover
Rear combination light
Service hole
When removing the rear combination light from
the body, it could interfere with the body and
cause scratching or damage to the body. When
removing the rear combination light from the
body, apply protective tape to the body.
CAUTION
Fogging or condensation on the inside of the
rear combination lights may occur due to a
natural phenomenon occurring as a result of a
temperature difference between the interior and
exterior of the combination lights. However, it
has no effect on the light performance because
the temperature inside the rear combination
lights rises after illuminating a rear turn light or
a period of time has elapsed.
Note
