Mazda Automobile Manual Download Page 419

Page: 419 / 508

Black plate (419,1)

6. Install the new bulb in the reverse order

of the removal procedure.

Fog lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Turn the screw counterclockwise and

remove it and then partially peel back
the mudguard.

3. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.

4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight back out of the
socket.

5. Install the new bulb in the reverse order

of removal.

Side-turn signal lights

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

Brake lights/Taillights (Rear side
marker lights)

LED type

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

Maintenance and Care

Owner Maintenance

8-47

Some models.

Mazda3_8BM5-EA-10F_Edition2 Page419
Monday, July 26 2010 1:54 PM

Form No.8BM5-EA-10F

Summary of Contents for Automobile





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands

Mazda Automobile, Manual

Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands