Mazda Automobile Manual Download Page 168 | Manualshive

Page: 168 / 508

background image

Black plate (168,1)

q

Brake System Warning Light

This warning has the following functions:

Brake system warning

í

Illuminates when there is a malfunction in
the brake switch.

Parking brake warning

The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake
is fully released, you may have a brake
problem.

Drive to the side of the road and park off
the right-of-way.

You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.

1. With the engine stopped, open the

hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-23).

2. After adding fluid, check the light

again.

If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.

Even if the light turns off have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.

WARNING

Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:

Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.

q

Anti-Lock Brake System (ABS)

The ABS control unit continuously
monitors the speed of each wheel. If one
is about to lock up, the ABS responds by
automatically releasing and reapplying
that wheel's brake.

The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal when the ABS operates. Continue
to depress the brake pedal without
pumping the brakes.

5-8

Driving Your Mazda

í

Some models.

Starting and Driving

Mazda3_8BM5-EA-10F_Edition2 Page168
Monday, July 26 2010 1:52 PM

Form No.8BM5-EA-10F

«
...
166
167
168
169
170
...
»

Summary of Contents for Automobile





























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Automobile

Brand: Valeo Pages: 17

Brand: Hama Pages: 2

Brand: ULTIMATE SPEED Pages: 19

Brand: Jeep Pages: 608

Brand: Ford Pages: 12

Brand: 3SIXT Pages: 12

Brand: Ironton Pages: 7

Brand: Renault Pages: 238

Brand: STO N SHO Pages: 7

Brand: Axxess Pages: 8

Brand: Dodge Pages: 276

2003 Silhouette

Brand: Oldsmobile Pages: 466

OPTIA hybrid 2020

Brand: Kia Pages: 54

Brand: Discount Car Stereo Pages: 8

IT FITS RBO1018

Brand: RBO Pages: 36

Brand: Volvo Pages: 62

Brand: Conrad Pages: 8

Platinum Pro Plug-in

Brand: Haltech Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands