Mazda Automobile Manual Download Page 392

Page: 392 / 508

Black plate (392,1)

The quality designation SM, or ILSAC
must be on the label.

–30 –20 –10

–20

100 120

5W-30

Inspecting Engine Oil Level

1. Be sure the vehicle is on a level

surface.

2. Warm up the engine to normal

operating temperature.

3. Turn it off and wait at least 5 minutes

for the oil to return to the oil pan.

4. Pull out the dipstick, wipe it clean, and

reinsert it fully.

2.0-liter and 2.5-liter engine

Full

Low

Type A

Type B

Full

Low

2.3-liter turbocharged engine

Max

Min

5. Pull it out again and examine the level.

The level is normal if it is between
Low or MIN and Full or MAX.
If it is near or below Low or MIN, add
enough oil to bring the level to Full or
MAX.

CAUTION

Do not add engine oil over Full or
MAX. This may cause engine
damage.

6. Make sure the O-ring on the dipstick is

positioned properly before reinserting
the dipstick.

8-20

Maintenance and Care

Owner Maintenance

Mazda3_8BM5-EA-10F_Edition2 Page392
Monday, July 26 2010 1:54 PM

Form No.8BM5-EA-10F

Summary of Contents for Automobile





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands

Mazda Automobile, Manual

Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands