Mazda Automobile Manual Download Page 425

Page: 425 / 508

Black plate (425,1)

Overhead light (Rear)

Edge

Vanity mirror lights

3. Install the new bulb in the reverse order

of removal.

Trunk light (4 Door)

1. Press both sides of the lens cap to

remove it.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

Luggage compartment light (5 Door)

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

Maintenance and Care

Owner Maintenance

8-53

Some models.

Mazda3_8BM5-EA-10F_Edition2 Page425
Monday, July 26 2010 1:54 PM

Form No.8BM5-EA-10F

Summary of Contents for Automobile





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands

Mazda Automobile, Manual

Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands