Mazda Automobile Manual Download Page 394

Page: 394 / 508

Black plate (394,1)

CAUTION

Radiator coolant will damage
paint.
Rinse it off quickly if spilled.

Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.

Don't add only water. Always add
a proper coolant mixture.

The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.

DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.

DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.

Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.

NOTE

If the

“

FL22

”

mark is shown on or near the

cooling system cap, it is recommended to use
Mazda Genuine FL22 engine coolant (page
8-3).

If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.

8-22

Maintenance and Care

Owner Maintenance

Mazda3_8BM5-EA-10F_Edition2 Page394
Monday, July 26 2010 1:54 PM

Form No.8BM5-EA-10F

Summary of Contents for Automobile





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands

Mazda Automobile, Manual

Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands