Mazda Automobile Manual Download Page 231

Page: 231 / 508

Black plate (231,1)

Horn

To sound the horn, press the

mark on

the steering wheel.

Hazard Warning Flasher

The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.

The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.

Hazard warning flasher

Depress the hazard warning flasher and all
the turn signals will flash.

NOTE

The turn signals do not work when the
hazard warning lights are on.

Check local regulations about the use of
hazard warning lights while the vehicle is
being towed to verify that it is not in
violation of the law.

Driving Your Mazda

Switches and Controls

5-71

Mazda3_8BM5-EA-10F_Edition2 Page231
Monday, July 26 2010 1:53 PM

Form No.8BM5-EA-10F

Summary of Contents for Automobile





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands

Mazda Automobile, Manual

Search results

Summary of Contents for Automobile

Reviews:

Related manuals for Automobile

Brands by name

Popular brands