Mazda 2012 CX-9 Owner'S Manual Download Page 463

Page: 463 / 584

Black plate (465,1)

Scheduled Maintenance (USA, Canada, and Puerto Rico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Driving in extremely hot conditions

Driving in mountainous conditions continually

If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended
intervals.

Maintenance and Care

Scheduled Maintenance

8-3

CX-9_8AU3-EC-09G_Edition1 Page465
Monday, July 13 2009 7:13 PM

Form No.8AU3-EC-09G

Summary of Contents for 2012 CX-9









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands

Mazda 2012 CX-9, Owner'S Manual

Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands