Mazda 2012 CX-9 Owner'S Manual Download Page 482

Page: 482 / 584

Black plate (484,1)

CAUTION

Radiator coolant will damage
paint.
Rinse it off quickly if spilled.

Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.

Don't add only water. Always add
a proper coolant mixture.

The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.

DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.

DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.

Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.

NOTE

If the

“

FL22

”

mark is shown on or near the

cooling system cap, it is recommended to use
Mazda Genuine FL22 engine coolant (page
8-3).

If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.

8-22

Maintenance and Care

Owner Maintenance

CX-9_8AU3-EC-09G_Edition1 Page484
Monday, July 13 2009 7:13 PM

Form No.8AU3-EC-09G

Summary of Contents for 2012 CX-9









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands

Mazda 2012 CX-9, Owner'S Manual

Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands