Mazda 2012 CX-9 Owner'S Manual Download Page 315

Page: 315 / 584

Black plate (317,1)

DVD video

●

Region code must include

“

”

“

ALL

”

●

NTSC

(National Television System Committee)
recorded type.

●

8 cm (3in) or 12 cm (5in) size

DVD videos bearing the following logo can be played.

DVD audio

DVD audio bearing the following logo can be played.

DVD-R and DVD-RW

DVD-Rs and DVD-RWs bearing each of the following logos can
be played.

Video CD, audio CD, CD-R, and CD-RW

●

Playback control function supported.

●

8 cm (3in) or 12 cm (5in) size

●

MP3 recorded type.

Video CDs, audio CDs, CD-Rs, and CD-RWs bearing each of the
following logos can be played.

*1: Audio is not produced by the headphones when DTS audio is selected. Listen to DTS audio over the vehicle's

speakers.

*2: Stereo playback is produced.
*3: Audio is not produced from the headphones. Listen to this audio from the speakers.

Unplayable discs

Discs not bearing the logo mark indicated in the above table.

Discs not including

“

”

“

ALL

”

in region code.

Discs recorded in other than NTSC (e.g. PAL or SECAM).

Interior Comfort

Rear Entertainment System

6-73

CX-9_8AU3-EC-09G_Edition1 Page317
Monday, July 13 2009 7:11 PM

Form No.8AU3-EC-09G

Summary of Contents for 2012 CX-9









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands

Mazda 2012 CX-9, Owner'S Manual

Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands