Mazda 2012 CX-9 Owner'S Manual Download Page 459

Page: 459 / 584

Black plate (461,1)

Rear

CAUTION

Do not use excessive force as it
may damage the cap or scratch
the painted bumper surface.

The rear bumper cover cannot be
removed completely. Attempting
to forcefully remove the rear
bumper cover could result in it
being damaged.

NOTE

Remove the front bumper cover completely and
store it so as not to lose it.

3. Securely install the tiedown eyelet

using the lug wrench.

Front

Lug wrench

Rear

Lug wrench

4. Hook the tying rope to the tiedown

eyelet.

Front

Rear

In Case of an Emergency

Emergency Towing

7-21

CX-9_8AU3-EC-09G_Edition1 Page461
Monday, July 13 2009 7:13 PM

Form No.8AU3-EC-09G

Summary of Contents for 2012 CX-9









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands

Mazda 2012 CX-9, Owner'S Manual

Search results

Summary of Contents for 2012 CX-9

Reviews:

Related manuals for 2012 CX-9

Brands by name

Popular brands